Product ID:CAAPCOAT 5-294 COLOR MATCHED LUSTERLESS POLYURTHANE TOPCOAT,
MSDS Date:02/01/1994
FSC:8010
NIIN:01-242-8160
Status Code:A
MSDS Number: CKNNC

CAAP CO INC

152 PEPE'S FARM RD
MILFORD, CT 06460
US

Emergency Phone: 202-483-7616

Info Phone: 203-877-0375

Cage: 60922

CAAP CO INC

MILFORD, CT 06460 US

Telephone: 203-877-0375

Cage: 60922

XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 51%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ISOBUTYL KETONE

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 17%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

RESIDUAL METHYLENE BIS (4-CYCLOHEXYLISOCYANATE)

CAS: 5124-30-1

RTECS: HQ9250000

Fraction By Weight: <0.5%

OSHA PEL 0.01 PPM CEILING

ACGIH TLV: 0.05PPM TWA

ISOCYANATE TERMINATED POLYESTER PREPOLYMER

CAS: 54954-83-5

Fraction By Weight: 22.1%

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-7%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.1-2%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

FUMED SYNTHETIC AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 2.5%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

CHROMIUM OXIDE GREEN

CAS: 1308-38-9

RTECS: GB6475000

Fraction By Weight: 0-0.5%

OSHA PEL 1.0 MG/M3

ACGIH TLV: 0.5 MG/M3

PYRROLOPYRROL RED 254

CAS: 84632-65-5

Fraction By Weight: 0-0.5%

ISOINDOLINE YELLOW 109

CAS: 106276-79-3

Fraction By Weight: 0-0.5%

COPPER PHTHALOCYANINE BLUE

CAS: 147-14-8

RTECS: GL8510000

ACGIH TLV: 1.0 MG/M3 (DUSTS/MIS

Health Hazards Acute and Chronic:CONTACT MAY DAMAGE EYES, IRRIATE SKIN,
AND CAUSE RESPIRATORY IRRITATION UPON INHALATION. CHRONIC HEALTH
HAZARDS: REPEATED OR PROLONGED EXPOSURE MAY CAUSE DEFATTING OF THE
SKIN, DERMATITIS, AND POSSI BLE SENSITIZATION. INHALATION OF VERY
HIGH VAPOR CONCENTRATIONS OR PROLONGED EXPOSURE MAY CAUSE NEURAL
DYSTUCTION, KIDNEY AND LIVER DAMAGE.
Effects of Overexposure:VAPOR EXPOSURE: BURNING EYES, HEADACHE,
DIZZINESS, THROAT IRRITATION, LOSS OF APPETITE, NAUSEA. CONTACT:
MAY CAUSE IRRITATION OF SKIN, BURING OF SKIN OR EYES.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES, EYE, SKIN
AND RESPIRATORY DISORDERS.

First Aid:EYES: FLUSH WITH WATER, GET IMMEDIATE MEDICAL ATTENTION.
SKIN: REMOVE CONTAMINATED CLOTHING. WASH SKIN PROMPTLY WITH SOAP
AND WATER. REPEAT IF NECESSARY. IF SIGNS AND SYMPTOMS OF EXPOSURE
EXIST, GET IMMEDIATE MEDICAL ATTENTION. INHALATION: REMOVE TO
FRESH AIR, GIVE ARTIFICIAL RESPIRATION IF NECESSARY. GET IMMEDIATE
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING, GET
IMMEDIATE MEDIC AL ATTENTION. IF VOMITING OCCURS SPONTANEOUSLY,
KEEP VICTIM'S HEAD BELOW HIS HIPS TO PREVENT BREATHING VOMITUS INTO
LUNGS.

Flash Point Method:TOC
Flash Point:=20.C, 68.F
68F
Lower Limits:1
Upper Limits:8
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USUSAL METHODS FOR FLAMMABLE LIQUIDS. THE
PRODUCT IS NOT MISCIBLE WITH WATER, ALTHOUGH WATER MAY BE USED TO
COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:NONE, PRODUCT IS A FLAMMABLE LIQUID.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AND DO NOT
SMOKE IN THE AREA. WEAR PROTECTIVE EQUIPMENT INCLUDING SOLVENT
RESISTANT GLOVES, APRON, BOOTS, AND A SELF-CONTAINED BREATHING
APPARATUS IN THE PRESSURE DEMAN D MODE OR A POSITIVE PRESSURE
AIR-SUPPLIED RESPIRATOR. *

Respiratory Protection:IF USE CONDITIONS CREATE VAPORS OR MISTS WEAR A
NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THOSE EMISSION LEVELS AT
POINT OF USE. APPROPRIATE RESPIRATORS INCLUDE A FULL FACEPIECE OR
PURIFYING CARTRIDG E RESPIRATOR EQUIPPED FOR ORGANIC VAPORS AND
MISTS, A SCBA IN THE PRESSURE DEMAND MODE, OR A POSITIVE PRESSURE
AIR-SUPPLIED RESPIRATOR.
Ventilation:A SPRAY BOOTH IS REQUIRED FOR SPRAY APPLICATIONS. ONLY
PROPERLY TRAINED AND PROTECTED PERSONNEL SHOULD BE IN THE IMMEDIATE
SPRAY AREA.**
Protective Gloves:SOLVENT FRESISTENT GLOVES
Eye Protection:SOLVENT RESISTENT EYEWEAR
Other Protective Equipment:AN EYEWASH AND SAFETY SHOWER SHOULD BE
NEARBY AND READY FOR USE. WASH WELL WITH SOAP AND WATER AFTER
HANDLING THE PRODUCT.
Supplemental Safety and Health
**THE EXHAUST VENTILATION SHOULD BE SUFFICIENT TO KEEP THE AIRBORNE
CONCETRATIONS BELOW THE PEL'S. VENTILATION SYSTEMS SHOULD BE
DESIGNED TO DRAW AIR PAST THE OPERATOR, THEN PAST THE SOURCE OF THE
VA POR, AND THEN EXHAUST, NOT THE REVERSE.

Boiling Pt:>116.1C, 241.F
B.P. Text:241-281F
Vapor Pres:8
Vapor Density:3.66
Volatile Org Content %:652
Spec Gravity:0.996
Evaporation Rate & Reference:0.85
Solubility in Water:INSOLLUABLE CO
Appearance and Odor:LIGHT2DARK GRY, GRN LIQUID, AROMATIC SOLVENT ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:IGNITION SOURCES, HOT SURFACES, AND
TEMPERATURES ABOVE 100 F ( 38 C ).
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN, AS WELL AS TRACES OF HCN MAY BE RELEASED DURING
COMBUSTION.

Waste Disposal Methods:INCINERATION IN AN APPROPRIATELY DESIGNED
&LICENSED INCINERATOR IS PREFERRED; THIS IS A RCRA HAZARDOUS
IGNITABLE WASTE. REGULATIONS MAY VARY FROM STATE DISPOSE OF
ACCORDING TO STATE, LOCAL, &FEDERAL REGULATIONS. WHEN THE 5-294-L
&CURING AGENT ARE MIXED &THE SOLVENT IS ALLOWED TO EVAPORATE, THE
SOL ID END PRODUCT IS A NON-HAZARDOUS LAND-ITEM.

Toxicological Information:FOR MORE COMPLETE HEALTH AND SAFETY
INFORMATION ON THE USE OF COATINGS CONTAINING RESIFUAL ISOCYANATE
PLEASE CONSULT MOBAY'S HELATH AND SAFETY INFORMATION BROCHURE.
*CONTAIN THE SPILL WITH DIKES OF A BSORBENT MATERIAL AND SOAK UP
THE SPILL WITH THE ABSORBENT MATERIAL. CLEAN UP THE ABSORBENT AND
CONTAIN SECURELY. SWEEP AND WET MOP THE AFFEECTED AREA WITH SOAP
AND WATER. VENTILATE THE AREA AS WEL L AS POSSIBLE.

Ecological:**THE USER MUST BE FULLY PROTECTED FROM EXPOSURE TO THE
MATERIAL DURING MIXING AND SPRAY APPLICATION. IF EXPOSURE MIGHT
OCCUR A FULL PERMEATION RESISTANT PROTECTIVE SUIT INCLUDING HEAD
COVERING, FA CE SHIELD, GLOVES, AND OVERSHOES IS

Transport Information:PAINT RELATED MATERIAL DOT CLASSIFICATION: 3.
(FLAMMABLE LIQUID).

SARA Title III Information:XYLENE METHYLISOBUTYLKETONE; MBK GREEN
CHROMIUM (III) OXIDE. COPPER PHTHALOCYANINE BLUE.
State Regulatory Information:THE FOLLOWING CHEMICAS ARE SPECIFICALLY
LISTED BY INDIVIDUAL STATES: OTHER PRODUCT SPECIFIC HEALTH AND
SAFETY DATA IN OTHER SECTIONS IN THIS MSDS MAY ALSO BE APPLICABLE
FOR STATE REQUIREMNETS. FOR DET AILS ON YO9UR REGULATORY
REQUIREMENTS, YOU SHOULD CONTACT THE APPROPRIATE AGENCY IN YOUR
STATE. MBK: MA,PA RIGHT TO KNOW. XYLENE: MA, PA, RIGHT TO KNOW.
METHYLENE BIS(4-CYCLOHEXYLISOCYANATE): MA, NJ, PA RIGHT TO KNOW.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.